SAVE AMP CQR

SAVE

EDIT

Spectrum Analyzer Mode Key Descriptions

Spectrum Analyzer Mode Functions

saves the current amplitude-correction factors table to the current mass-storage device ( analyzer memory or memory card). To verify the current mass storage device,

press SAVE AMP COR If MAX REG # appears on the analyzer display, the current mass storage device is analyzer memory. If PREFIX= is displayed, the memory card is

the mass storage device. Press ISAVE) or cm), then INTERNAL CARD to change the current mass storage device.

Press SAVE AMP COR , enter a register number, then press @KiK) to save the current amplitude-correction factors table in analyzer memory or on the memory card. When saved on the memory card, amplitude-correction factors tables are stored with “a-“, the prefix, and the register number entered. When saved in analyzer memory, the register number is saved in a trace register. Trace register values are restricted to a range between 0 and the number x indicated by MAX REG# = x.

Front-Panel Key Access ICAL)

Refer to the HP 8590 E-Series and L-Serks Spectrum

Analgws and HP 8591 C Cable TV Analyzer Programmer’s Guide for more information.

passes the text from the DLP editor memory through the parser to execute as analyzer commands. Pressing SAVE EDIT is similar to outputting the text to the analyzer from an external controller. If the text (commands) is a valid user-defined function, it passes through the parser and into the analyzer user memory. It will replace an existing user defined function of the same name.

The DLP editor memory buffer remains intact when the analyzer is preset or powered off so the text being edited will not be lost.

Front-Panel Key Access (jj] or ISAVE_)

6-125