HP Cable Box 8591C manual Apnd CAT Item, Option 021 only

Spectrum Analyzer Mode Key Descriptions

Spectrum Analyzer Mode Functions

ANALYZER ADDRESS

ANALYZER GAINS

ANNOTATN ON OFF

APND

CAT ITEM

Option 021 only.

allows you to set the HP-IB address of the analyzer. The analyzer address is set to 18 by pressing DEFAULT CONFIG .

Front-Panel Key Access [??jXQ

displays the current value of the gain for various functional blocks within the analyzer. The gain values will vary depending on the current analyzer settings. This is a service diagnostic function and is for service use only. Refer to the service guide for more information.

Front-Panel Key Access (CAL)

screen annotation on or off. However, softkey annotation will remain on the screen. The screen annotation may not be required for prints or plots, or during remote operation. Refer to the HOLD softkey description regarding softkey annotation.

Front-Panel Key Access cm)

Refer to Chapter 4 of the HP 8590 E-Series and L-Series

S&W-urn Analyzers and HP 8591 C Cable TV Analyzer Programmer’s Guide for more information.

starts the DLP editor function and allows the highlighted item from the catalog of analyzer memory to be appended to the end of the item that is currently in the analyzer DLP editor memory. If the item to be appended will not fit in the available memory space, it will not be appended.

Front-Panel Key Access [RECALL] or ISAVE)

6-16