Digital Tracking System (ProContractor and Ironman units)
Secondary Menu - Stored Data and WatchDog Pump Protection Modes
1.Perform Pressure Relief, steps 1 - 4 if they have not already been done.
2.Turn power switch on while holding DTS button down.
7.Short press DTS button.
ti22719a
3.The sprayer model briefly displays (e.g. 5900), SERIAL NUMBER scrolls past and then serial num- ber (e.g. 00001) displays.
ti22720a
4.Short press DTS button and MOTOR ON scrolls past and then total motor run hours are displayed.
ti22721a
5.Short press DTS button. LAST ERROR CODE scrolls by and last error code is displayed; e.g. E=07. See sprayer Repair manual for additional information.
ti22722a
6.Press and hold DTS button to clear error code to zero.
ti22723a
ti22724a
8.Press and hold (8 seconds) DTS button to move to WatchDog Trigger % menu. Continue to hold DTS button and Watchdog can be set to trigger at 30, 40, 50, or 60% of current sprayer pressure setting. Release DTS button when desired % is displayed. default is 50%.
ti22725a
9. Short press to move to SOFTWARE REV.
ti22726a
18 | 332919C |
