Startup
1.Place suction tube and drain tube in grounded metal pail partially filled with flushing fluid. Attach ground wire to pail and to earth ground.
ti14844a
2.Turn prime valve down to DRAIN position. Turn pressure control counterclockwise to lowest pres- sure.
ti14842a | ti22708a |
3. Set pump switch OFF.
ti5790a
4.Start Engine
a. Move fuel valve to open.
ti5248a
b. Move choke to closed.
ti5249a
Startup
c.Set throttle to fast.
ti5250a
d. Set engine switch to ON.
ti5262a
5. Pull rope to start engine.
ti5263a
6.Increase pressure enough to start pump stroking and allow fluid to circulate for 15 seconds; turn pres- sure down and turn prime valve forward to SPRAY position.
ti22709a
ti14845a
7. Disengage spray gun trigger lock.
ti22818a
332919C | 13 |
