![](/images/new-backgrounds/1150051/15005133x1.webp)
Digital Tracking System
(ProContractor and Ironman units)
Operation Main Menu
Short press to move to next display. Press and hold (5 seconds) to change units or reset data.
ti22713a
1.Turn pressure to lowest setting. Trigger gun to relieve pressure. Turn prime valve down to DRAIN position.
ti22714a ti13243a
2.Turn power ON. Pressure display appears. Dashes will not appear unless pressure is less than 200 psi (14 bar, 1,4 MPa).
OFF
ON
ti22715a
Change Display Units
Press and hold DTS button for 5 seconds to change pressure units (psi, bar, MPa) to desired units. Selec- tion of bar or MPa changes gallons to liters x 10. To change display units DTS must be in pressure display mode and pressure must be at zero.
FT
M
ti22716a
Digital Tracking System (ProContractor and Ironman units)
Job Gallons
1.Short press DTS button to move to Job Gallons (or liters x 10).
ti22717a
NOTE: JOB scrolls past, then the number of gallons sprayed above 1000 psi (70 bar, 7 MPa) displays.
Lifetime Gallons
1.Short press DTS button to move to Lifetime Gallons (or liters x 10).
NOTE: LIFE scrolls briefly, then the number of gal- lons sprayed above 1000 psi (70 bar, 7 MPa) dis- plays.
ti22718a
332919C | 17 |