Spectrum Analyzer Mode Key Descriptions

Spectrum Analyzer Mode Functions

SET

DATEallows you to set the date of the real-time clock. Enter the date in the YYMMDD format using the number keypad and

press [ENTER]. Valid year (YY) values are 00 through 99. Valid month (MM) values are from 01 to 12, and valid day values are from 01 to 31.

Front-Panel Key Access (-1

SET

TIMEallows you to set the time of the realtime clock. Enter the time in 24 hour, HHMMSS format, using the number keypad

and pressing (ENTER]. Valid hour (HH) values are from 00 to

23.Valid minute (MM) and second (SS) values are from 00 to

Front-Panel Key Access [WI

Setup

accesses the menu used to set up parameters specific to the power measurements.

If another front- key is pressed, exiting the power menus, press the I-1 key twice to return to the last power menu that was being used.

Front-Panel Key Access C-1

changes the sweep control to single sweep if the analyzer is in the continuous sweep mode. It executes a sweep after the trigger condition is met.

6-132