CPL RBW ON OFF
CPL SWP ON OFF
CPL VBW ON OFF
CRT HORZ POSITION
CRT VERT POSITION
Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
automatically selects the optimum resolution bandwidth for an unmodulated pulse if the pulse width has been entered. If the pulse width has not been determined, the resolution bandwidth will not be coupled to the pulse parameters and a warning message will occur. If a resolution bandwidth is entered manually, the coupling will be turned off.
automatically selects the optimum sweep time if the pulse repetition interval has been entered. If the pulse repetition interval has not been determined, the sweep time will not be coupled and an error message will occur. If a sweep time is entered manually, the coupling will be turned off. Sweep time coupling only applies to the frequency domain window.
automatically selects the optimum video bandwidth if the gate length has been entered. If the gate length has not been determined, the video bandwidth will not be coupled to the gate length and an error message will occur. If a gate length is entered manually, the coupling will be turned off.
changes the horizontal position of the signal on the analyzer display. Press CAL STORE if you want the analyzer to use this position permanently, so that it is not lost when the power is turned off.
changes the vertical position of the signal on the analyzer display. Press CAL STORE if you want the analyzer to use this position permanently, so that it is not lost when the power is turned off.
6 - 4 9