Using Spectrum Analyzer Features
Saving and Recalling Data from the Memory Card
To Recall Limit-Line lhbles or Amplitude Correction Factors
1.Use Change Prefix to enter the prefix, or use the existing prefix.
2.press [RECALL_). If INTERNAL is underlined, press INTERNAL CARD to select CARD.
3.Press Card -+ Trace to access the menu with LIMIT LINES and
AMP COR.
4.Press either LIMIT LINES , to recall a limit-line table, or AMP COR , to recall amplitude-correction factors.
5.Enter the register number that the limit-line data or amplitude-correction factors was saved under and then press CENTER).
NOTE
If LOAD FILE is used to recall limit-line files or amplitude-correction factor files, the traces are
set to the store-blank mode. Press Cm), CLEAR WRITE A to view trace A data, or press (PRESET).