Spectrum Analyzer Mode Key Descriptions

Spectrum Analyzer Mode Functions

CLEAR WRITE C

erases any data previously stored in trace C and continuously displays any signals detected during the sweep of the analvzer. This function is activated at power on and by pressing (jj).

Changing the trace mode of trace C to clear write or minimum hold can change the trace mode of trace A and trace B. If trace A or trace B is in clear-write mode or maximum-hold mode when trace C is changed to clear write or minimum hold, the trace mode of trace A or trace B is changed to store blank. The following table shows the trace mode of trace A or trace B before and after changing trace C to clear-write or minimum-hold trace mode.

If you want to use trace A or trace B in the clear-write or maximum-hold mode and do not want trace C to blank it, use minimumhold or view-trace mode for trace C.

Front-Panel Key Access Cm)

6-42