1-3. Additional Symbols For Installation, Operation, And Maintenance

FIRE OR EXPLOSION hazard.

D Do not install or place unit on, over, or near combustible surfaces.

DDo not install unit near flammables.

DDo not overload building wiring − be sure power supply system is properly sized, rated, and protected to handle this unit.

FALLING UNIT can cause injury.

DUse lifting eye to lift unit only, NOT running gear, gas cylinders, or any other accessories.

DUse equipment of adequate capacity to lift and support unit.

DIf using lift forks to move unit, be sure forks are long enough to extend beyond opposite side of unit.

MOVING PARTS can cause injury.

DKeep away from moving parts such as fans.

DKeep all doors, panels, covers, and guards closed and securely in place.

DHave only qualified persons remove doors, panels, covers, or guards for maintenance as necessary.

DReinstall doors, panels, covers, or guards when maintenance is finished and before re- connecting input power.

READ INSTRUCTIONS.

DRead Owner’s Manual before using or servic- ing unit.

DUse only genuine Miller/Hobart replacement parts.

OVERUSE can cause OVERHEATING

DAllow cooling period; follow rated duty cycle.

DReduce current or reduce duty cycle before starting to weld again.

DDo not block or filter airflow to unit.

STATIC (ESD) can damage PC boards.

DPut on grounded wrist strap BEFORE handling boards or parts.

DUse proper static-proof bags and boxes to store, move, or ship PC boards.

MOVING PARTS can cause injury.

DKeep away from moving parts.

DKeep away from pinch points such as drive rolls.

WELDING WIRE can cause injury.

DDo not press gun trigger until instructed to do so.

DDo not point gun toward any part of the body, other people, or any metal when threading welding wire.

H.F. RADIATION can cause interference.

DHigh-frequency (H.F.) can interfere with radio navigation, safety services, computers, and communications equipment.

DHave only qualified persons familiar with electronic equipment perform this installation.

DThe user is responsible for having a qualified electrician prompt- ly correct any interference problem resulting from the installa- tion.

DIf notified by the FCC about interference, stop using the equipment at once.

DHave the installation regularly checked and maintained.

DKeep high-frequency source doors and panels tightly shut, keep spark gaps at correct setting, and use grounding and shielding to minimize the possibility of interference.

ARC WELDING can cause interference.

DElectromagnetic energy can interfere with sensitive electronic equipment such as computers and computer-driven equipment such as robots.

DBe sure all equipment in the welding area is electromagnetically compatible.

DTo reduce possible interference, keep weld cables as short as possible, close together, and down low, such as on the floor.

DLocate welding operation 100 meters from any sensitive elec- tronic equipment.

DBe sure this welding machine is installed and grounded according to this manual.

DIf interference still occurs, the user must take extra measures such as moving the welding machine, using shielded cables, using line filters, or shielding the work area.

1-4. California Proposition 65 Warnings

YWelding or cutting equipment produces fumes or gases which contain chemicals known to the State of California to cause birth defects and, in some cases, cancer. (California Health & Safety Code Section 25249.5 et seq.)

YBattery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

For Gasoline Engines:

YEngine exhaust contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

For Diesel Engines:

YDiesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm.

OM-221 694 Page 3

Page 6 Page 8
Page 7
Image 7
Miller Electric XMC 4000 manual California Proposition 65 Warnings, Fire or Explosion hazard
Page 6 Page 8

XMC 4000 specifications

The Miller Electric XMC 4000 is a versatile and robust portable welding machine designed to meet the needs of skilled welders across various industries. With a focus on innovation and performance, the XMC 4000 combines advanced technologies with user-friendly features, making it an ideal choice for both experienced professionals and newcomers to the welding field.

One of the standout features of the XMC 4000 is its exceptional welding output. The machine is capable of delivering a maximum output of 400 amps, allowing it to handle a wide range of applications, from light fabrication to heavy-duty industrial tasks. Its multi-process capabilities enable users to perform MIG, TIG, Stick, and Flux-Cored welding, providing versatility and flexibility for different welding requirements.

The XMC 4000 is equipped with Miller's Auto-Set feature, which simplifies the welding process. This technology automatically adjusts the settings based on the user's selected material thickness and wire diameter, ensuring optimal arcs and reducing the likelihood of operator error. Additionally, the machine includes a built-in dynamic arc control that improves arc stability and provides a consistent weld quality, even in challenging conditions.

Another key characteristic of the XMC 4000 is its user-friendly interface, featuring a large LCD display that provides real-time data on welding parameters. This allows operators to make quick adjustments as needed, enhancing productivity and efficiency on the job site. The intuitive design also makes it easy for users to navigate through various settings without extensive training.

Durability is a priority with the XMC 4000. The unit is built with high-quality materials and designed to withstand harsh working environments. Its rugged construction, combined with a compact and lightweight design, makes it easy to transport, whether to the job site or between service locations.

In terms of power options, the XMC 4000 is adaptable to various input voltages, allowing it to operate seamlessly in both industrial and field-based applications. This level of flexibility means that welders can use it in diverse locations, making it a reliable companion for on-the-go projects.

Overall, the Miller Electric XMC 4000 stands out as a powerful, versatile, and user-friendly welding machine that meets the demands of today’s welding professionals. Its advanced features, durable design, and multiple process capabilities make it an excellent investment for anyone looking to enhance their welding capabilities.
Top Page Image Contents