GENERAL POWER TOOL SAFETY WARNINGS

WARNING READ ALL SAFETY WARNINGS AND INSTRUCTIONS.

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

•Keep work area clean and well lit. Cluttered or dark areas invite accidents.

•Do not operate power tools in explosive atmo- spheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

•Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

•Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

•Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of elec- tric shock if your body is earthed or grounded.

•Do not expose power tools to rain or wet con- ditions. Water entering a power tool will increase the risk of electric shock.

•Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

•When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

•If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

PERSONAL SAFETY

•Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medi- cation. A moment of inattention while operating power tools may result in serious personal injury.

•Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

•Prevent unintentional starting. Ensure the switch is in the off-position before connecting

to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

•Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

•Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

•Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewel- lery or long hair can be caught in moving parts.

•If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

POWER TOOL USE AND CARE

•Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

•Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

•Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

•Store idle power tools out of the reach of chil- dren and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

•Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

•Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

•Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions

2

3

Page 1 Page 3
Page 2
Image 2
Milwaukee 5385-20 manual General Power Tool Safety Warnings, Work Area Safety, Electrical Safety, Personal Safety
Page 1 Page 3

5385-20 specifications

The Milwaukee 5385-20 is a powerhouse tool designed for both professionals and serious DIY enthusiasts who seek reliability and performance in their projects. This 18-volt cordless rotary hammer combines the convenience of portability with cutting-edge technology, making it an essential addition to any toolkit.

One of the standout features of the Milwaukee 5385-20 is its percussion mechanism, which enables it to effectively tackle tough materials like concrete, brick, and masonry. The hammer offers a 1-5/8 inch drilling capacity in concrete using the SDS-Plus chuck system, allowing for quick bit changes and enhanced productivity. This feature is crucial for projects that require multiple bit types, as it helps to minimize downtime.

The tool is powered by Milwaukee’s superior REDLITHIUM battery technology, which provides longer run time and more power than standard lithium-ion batteries. This ensures that users can work for extended periods without the worry of battery life, making the 5385-20 a reliable choice for heavy-duty applications. The REDLINK PLUS intelligence system also helps prevent overheating and overloading to enhance the tool’s lifespan and performance.

Another significant aspect of the Milwaukee 5385-20 is its lightweight design. Weighing just around 7.5 pounds, it is easy to handle and maneuver during extended use, reducing fatigue for the user. The ergonomic handle is designed for maximum comfort and control, which is particularly beneficial in overhead applications or tight spaces.

In addition to its drilling and chiseling capabilities, the rotary hammer features multiple speed settings to give users the flexibility to choose the right speed for different materials and applications. This versatility makes it an ideal tool for construction workers, electricians, and plumbers.

Finally, the Milwaukee 5385-20 also boasts an integrated LED light that illuminates the work area, allowing for better visibility in dimly lit spaces. This small yet invaluable feature enhances safety and precision during operation, ensuring that users can work effectively, no matter the environment.

Overall, the Milwaukee 5385-20 combines innovative technology, powerful performance, and user-friendly design, making it a top choice for anyone in need of a reliable rotary hammer.
Top Page Image Contents