USER GUIDE
36
Figure 39 Cascade Inputs box
Left Port No. A row appears for each input port of the Legacy switch.
Name – From the Drop-down list select the DX Central to which the switch is
cascaded 1 level up.
Right Port No – Select the Server port number of the 1 level up DX Central to
which the switch is connected.
Do the above for each cascaded port.
Click OK.
Note! You can configure the cascade inputs by clicking the User ports on the figure
of the Legacy switch. See Figure 41.
Method B
1. On the picture of the DX Central click the output port that cascades to Legacy
switch. The General tab of the Computer Port Configuration box appears.
2. Click the Cascade checkbox to un-gray the Cascade tab.
3. Click the Cascade tab. The Cascade box appears see Figure 40.