4
FCC Radio Frequency Interference Warning
Notice for customers in U.S.A
This equipment generates and uses radio frequency energy, and if
not installed and used in strict accordance with the manufacturer’s
instructions, can cause interference to radio and television reception.
This equipment has been certified and found to comply with the
limits for a Class B computing device in accordance with the specifi-
cations in Subpart J of Part 15 of the FCC rules, which are designed
to provide reasonable protection against such interference in a com-
mercial installation.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the in-
terference by one or more of the following measures:
1. Reorient the receiving antenna.
2. Reorient the computer with respect to the receiver.
3. Move the computer further away from the receiver.
4. Plug the computer or receiver into a different outlet so computer
and receiver are on different branch power circuits.
5. Ensure that card mounting screws, attachment connector screws,
and ground wires are tightly secured.
If necessary, the user should consult with the dealer or an
experienced radio/television technician for additional suggestions.
The user might find the following booklet helpful, prepared by the
Federal Communications Commission: How to Identify and Resolve
Radio TV Interference Problems. It is available from the U.S.
Government Printing Office, Washington, DC 20492, Stock No.
004-000-00345-4 (FCC Part No. 15.838b)
Notice for customers in Canada
This apparatus complies with the Class B limits for radio noise
emissions set out in Radio Interference Regulations.
This mark cortifies this product meet the requirements of the
EU(European Union) concerning interference causing equipment regularions.
CE stands for Conformité Européemme (European Conformity).