Minolta CD-10 4-3 Setting the SCSI ID

SWITCH 0 1 2 3 4 5 6 7 8 9

SCSI ID 0 1 2 3 4 5 6 7 0 1

SCSI ID Switch

SWITCH

SCSI ID

023 5

789

023 5

SCSI ID 0 is assigned

to the hard drive.

SCSI ID 3 is assigned to

the internal CD-ROM drive. SCSI ID 7 is assigned to

the Macintosh system.

4-3 Setting the SCSI ID

The SCSI ID is a unique number assigned to each SCSI device.

Therefore, two devices must not have the same ID number. The

SCSI ID is independent of the order of physical device connection.

Note that SCSI IDs may have been previously assigned to a disk

drive, CD-ROM drive, or other built-in devices in the computer. To

obtain this information, refer to the related computer and SCSI de-

vice manuals. Take care not to use the same ID number more than

once.

NOTE: Change the SCSI ID number after turning off the power to this

drive unit and computer. The new number will not become effective

while power is still supplied.

To set the SCSI ID

Change the value on the ID number display window by turning the

SCSI ID switch (use the enclosed screwdriver). If two devices have

the same SCSI ID, reassign all the ID numbers.

The initial default value “4” is assigned to this drive unit in the

plant before shipment.

For Macintosh computers

SCSI ID numbers 0 and 7 are used by the Macintosh hard drive

and system. SCSI ID number 3 is used by internal CD-ROM drives.

Therefore, SCSI ID numbers 2, 4, 5, and 6 are available for use with

this drive unit (unless already taken by another external SCSI de-

vice).

NOTE: SCSI ID number 3 is available when the Macintosh does not have

a built-in CD-ROM drive. For an external CD-ROM drive, SCSI IDs other