29
FULLYAUTOMATIC OPERATION
28
Full Auto is the camera’s standard operating mode and is
suited for use in almost any situation.
• Press the program-reset button to set the camera to fully
automatic operation (Full Auto) at any time. See page 71.
1.Press the main switch to
turn the camera on.
2.Press the program-reset
button to set the camera
to Full Auto.
3.Set the format-selector
switch to the desired print
format (C, H, or P).
4.Center your subject in the
focus frame and
press the shutter-release
button partway down to
activate autofocus. The
focus lamp will glow
when the subject is in
focus.
•The built-in flash will pop-up
and fire when necessary.
5.When using a zoom lens,
rotate the zooming ring
on the lens to frame the
subject as desired.
6.Press the shutter-release
button all the way down
to take the picture.
•In low-light conditions, the AF Illuminator (flash) will fire to
determine the focus distance.
• If your subject is outside the focus frame , use focus hold.
See page 31.
2102 OM E 16/10/97 11:27 AM Page 28