Minolta Minolta Vectis, S-100 instruction manual CONTINUOUS-DRIVE Mode, Press the drive-mode

CONTINUOUS-DRIVE MODE

In this mode, the camera continues to release the shutter and advance the film as long as the shutter-release button is held down.

REMOTE-CONTROL (optional)

The IR Remote Control RC-3 is an optional accessory you can purchase to operate your camera from up to 6 m (19.7ft.) away.

1. Press the drive-mode

button until appears in the data panel.

2. Press the shutter-release button down and hold.

•When taking flash pictures, the shutter will release after the flash is charged.

•When the subject is moving, the shutter will release after the camera focuses on the subject.

•To cancel continuous-drive mode, press the continuous-drive mode button until the drive-mode indicator disappears from the data panel, or turn the camera off.

Emitter window

2s delay button

Release button

1.Place the camera on a tripod, then press the

remote-control button

until appears in the data panel.

2.Arrange the camera and subject positions, then compose your picture.

3.Point the emitter window toward the front of the camera and press the • or 2s button.

•If the • button is pressed, the lamp on the front of the camera will blink once before the picture is taken.

•If the 2s button is pressed, the lamp on the front of the camera will blink for two seconds before the shutter releases.

58 59