Camera Warnings

MODE

DISPLAY

CAUSE

All

Batteries have been

replaced.

and

blink

All

Camera operation

malfunction.

Err appears

All

Lens is not attached, or is

attached improperly.

appears

Required shutter speed is

beyond the range of the

camera.

1000 or 30” blinks

Required aperture is

beyond the range of the

lens.

Maximum or minimum

aperture blinks

ACTION

PAGE

Reset the date and time.

52 – 53

	Remove and reinstall the batteries.	18

	Attach the lens, or disconnect and reattach the	20
	lens.	20
	lens.

	Select a larger/smaller aperture until the display	45 – 46
	stops blinking.	45 – 46
	stops blinking.

	Select a faster/slower shutter speed until the	48 – 49
	display stops blinking.	48 – 49
	display stops blinking.

Page 43

Image 43

Minolta Minolta Vectis, S-100 instruction manual Camera Warnings

Contents

Instruction Manual New print formats… Advantages of the Advanced Photo System Easier to load…New processing… Table of Contents For Proper and Safe USE Splashproof Operating Temperature and ConditionsPlease Note Film Cassette Warning Names of PartsBody Names of Parts Viewfinder Data Panel Quick Operation Shown Attaching the StrapAttach the camera strap as Snap the battery-chamber door shut Installing the BatteriesChecking the Battery Power Using the eyepiece cap, open the battery-chamber door Lens Hood Note Removing the Lens Holding the Camera Diopter AdjustmentHandling the Camera Subject appears sharpest Use IX240 type film in this camera Visual Exposure IndicatorsLoading Film Push the film chamber in until it clicks shut Loading Film Fully Automatic Operation Press the shutter-release Special Focusing SituationsFrame or when autofocus is difficult to confirm Focus Hold Using the BUILT-IN Flash Rewinding the Film Subject Program Selection Mode OperationClose-up Mode For close-up photography Sports Mode Subject Program Selection Press the program-select button until the subject Portrait ModeLandscape Mode Program pointer is under Use a tripod to reduce camera shake CLOSE-UP ModeSports Mode For best results use the V Lens 50mm f/3.5 Macro Data panel Tips Night Portrait ModePhotographing Night Scenes Appears Shutter Speed Mode Aperture PriorityCreative Exposure Modes Shutter Speed and Aperture in the Data Display Large Aperture Mode FlashTo cancel the flash, push the flash down Aperture Control Press the flash-mode button to turn the flash on To cancel the flash, push the flash down Mode Shutter Priority Fast Shutter Speed Shutter Speed Control DATE/TIME Imprinting Sequence is as follows Manual Focus SELF-TIMERPress the focus-mode Place the camera on a tripod, then press CONTINUOUS-DRIVE ModePress the drive-mode Remote-control button Until appears in the data panel Attaching the Eyepiece Cap Remove the eyepiece Focus Hold in Remote Control ModeCup Canceling the AF Illuminator Changing the BatteryPull out the battery chamber and remove the old battery Slide the battery chamber back into the remote control Metered Exposure Over Exposure Exposure Compensation 5400xi Press the flash-mode button to raise the built-in flashYour flash manual 5400HS Using the Optional Remote Control Taking Pictures in Wireless/Remote Flash Mode Fully-automatic operation PROGRAM-RESET ButtonProgram-reset button Pressing the program-reset LAB Services Lens Hood Accessory InformationSpecifications for the V Lens 28-56mm f/4-5.6 Lenses Storage CleaningQuestions and Service Care and Storage AF System Technical Details Situation is unsuitable for TROUBLE-SHOOTINGNo display appears when Incorrectly Camera is switched on Batteries are loaded Camera Warnings Quick Reference Guide 9222-2102-31 P9705-A705