RU760.qxd
English
Instructions for use
2.Installing the remote control
Inserting the batteries
1 Press the cover inwards and slide it in the direction of the arrow.
2Place two R6 AA type batteries into the battery compartment, as shown.
3Slide the cover back and click it firmly into place.
Testing the remote control
The remote control has been programmed to operate most Philips appliances. Because the RU760 may use different signals for each brand and even for different models of the same brand, it is advisable to test whether your appliance responds to the RU760.
The example below (TV) instructs you how to do this.
You can repeat the same steps for other appliances (DVD,VCR, etc.) which you want to operate using the RU760.
Example of TV:
1Turn your TV on manually or use the original remote control. Tune to channel 1.
2Use the RU760’s mode selector to select TV.
| Press the SELECT key until the green light |
|
|
|
| around the Standby key lights up. | VCR DVD SAT AMP CD | ||
| To select the other devices press the SELECT | |||
|
|
|
| |
| key several times until the label of the device | LEARN | SELECT | GUIDE |
| TITLE | AUDIO CHAPTER SUBTITLE | ||
| you want to operate, lights up. |
|
|
|
| If neither the Standby key nor one of the labels light up, check whether the | |||
| batteries are properly inserted (see ‘Inserting the batteries’). |
| ||
3 | Check whether all the keys are working. | AV |
| P P |
| For an overview of the keys and their |
|
|
|
| functions see ‘3. Keys and functions’. |
|
|
|
– | If the TV responds as it should to all of the |
|
|
|
| key commands the RU760 is ready for use. |
| SOURCE |
|
| TV | VCR | DVD | |
| 1 | 2 | 3 | |
|
| |||
|
| AUX | TUNER | CD |
•If the device does not respond at all or not to all of the key commands, follow the instructions under
‘Setting the remote control’.
4
