RU760.qxd
Instructions for use
Learn a key
IIf you miss certain functions from your original remote control of the RU760, the RU760 can learn these functions from the original remote.
You can store a fuction under any of the available keys of the RU760, except LEARN, SELECT and SHIFT. Please, note that any function already stored under a key will be deleted.
Example for VCR:
Make sure you have the original VCR remote control at hand.
1Select the device mode VCR, with the
SELECT key.
DVD SAT AMP CD
LEARN SELECT GUIDE
TITLE | AUDIO CHAPTER SUBTITLE |
English
2Press the LEARN key and the target key on the RU760 simultaneously for 5 seconds, until the VCR label blinks twice and remains lit.
3Place both remote controls on a flat surface (like a coffee table) and aim them
DVD SAT AMP CD
LEARN SELECT GUIDE
TITLE | AUDIO CHAPTER SUBTITLE |
DISC | SYSTMENU |
10 cm.
4Press the button you want to copy on the original remote control.
– If the RU760 has learned the code, the VCR label will blink twice to confirm the signal is stored.
– If the VCR light blinks once for a longer period, the IR signal is not learned by the RU760. Please, try a few times and make sure the remotes are aligned as described in step 3.
If the RU760 cannot learn the code after several times trying, it is possible that:
–The IR signal of your original device is out of range (the RU760 can only learn IR signals with a carrier signal of
–The memory of the RU760 is full.
–The RU760 stopped the learning process after 20 seconds if no
IR signals are found. Check if your original remote control is working correctly.
9
