Miro Displays P19F98 manual Power Management, Plug & Play, Timing Guide

POWER MANAGEMENT

The power management feature of this monitor is comprised of two stages: On or Out Of Range (Green), OFF (Amber blinking).

Power Mode	H-Sync	V-Sync	Video	LED Color
Normal	Pulse	Pulse	Active	Green
Out Of Range	Pulse	Pulse	Active	Green
Off	Pulse	No pulse	Blanked	Amber blinked per 1 sec.
Off	No pulse	Pulse	Blanked	Amber blinked per 1 sec.
Off	No pulse	No pulse	Blanked	Amber blinked per 1 sec.

This monitor meets the Green Monitor standards as set by the Video Electronics Standards Association (VESA). This feature is designed to conserve electrical energy by reducing power consumption when there is no video input signal present. When there is no video input signal this monitor, following a time-out period, will automatically switch to an OFF mode. This reduces the monitor's internal power supply consumption. After the video input signal is restored, full power is restored and the display is automatically redrawn. The appearance is similar to a "Screen Saver" feature except the display is completely off. The display is restored by pressing a key on the keyboard, or clicking the mouse.

PLUG & PLAY

This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The communication channel is defined in two levels, DDC1 and DDC2B. The DDC1 is a unidirectional data channel from the display to the host that continuously transmits EDID information. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel.

TIMING GUIDE

The 19" color monitor is a multi-frequency monitor. It operates at horizontal frequencies between 30 kHz and 98 kHz, vertical frequencies between 50 Hz and 160 Hz. Because of its microprocessor-based design, it offers auto-synchronization and auto-sizing capabilities. This monitor offers 11 pre-programmed settings as listed in the table below.

Timing Table
		Resolution		Frequency
Preset		Horizontal	Vertical	Horizontal	Vertical
VGA	M1	720	400	31.47kHz	70Hz
	M2	640	480	31.47kHz	60Hz
	M3	640	480	43.27kHz	85Hz
	M4	800	600	53.67kHz	85Hz
	M5	800	600	63.90kHz	100Hz
VESA	M6	1024	768	60.02kHz	75Hz
	M7	1024	768	68.67kHz	85Hz
	M8	640	480	50.60kHz	100Hz
	M9	1280	1024	79.98kHz	75Hz
	M10	1280	1024	91.15kHz	85Hz
	M11	1600	1200	93.75kHz	75Hz

*In addition to 11 factory modes, there are 8 additional user modes. If more than 8 modes are inputted, it will be overrided in accordance with saving order of additional modes.

*In case of using Macintosh, you must need Mac adapter.

10 11