Miro Displays TD570 manual Timing Table, PIN Assignment

English

TIMING TABLE

		Resolution		Frequency
Preset		Horizontal	Vertical	Pixel Rate	Vertical
	M1	640	480	25.175MHz	60.0Hz
VGA	M2	720	400	28.322MHz	70.0Hz
	M3	640	480	30.240MHz	67.0Hz
	M4	640	480	31.500MHz	75.0Hz
	M5	800	600	36.000MHz	56.0Hz
SVGA	M6	800	600	40.000MHz	60.0Hz
	M7	800	600	50.000MHz	72.0Hz
	M8	800	600	49.500MHz	75.0Hz
	M9	1024	768	65.000MHz	60.0Hz
XGA	M10	1024	768	75.000MHz	70.0Hz
	M11	1024	768	78.750MHz	75.0Hz
SXGA	M12	1280	1024	108.000MHz	60.0Hz
	M13	1280	1024	135.000MHz	75.0Hz
	M14	832	624	57.280MHz	74.5Hz

Note: In case of using MacintoshTM, you may need a Mac adapter.

PIN ASSIGNMENT

VGA Connector				VGA CONNECTOR
	Pin	1	Red	1	5
	Pin	2	Green
	Pin	3	Blue	6	10
	Pin	4	NC
	Pin	5	Ground
	Pin	6	Ground	11	15
	Pin	7	Ground
	Pin	8	Ground
	Pin	9	+5V for DDC
	Pin	10	Ground
	Pin	11	NC
	Pin	12	DDC SDA
	Pin	13	Horizontal Sync.
	Pin	14	Vertical Sync.
	Pin	15	DDC SCL

Note: When resolutions are shown that are lower than the pixel count of the LCD panel, text may appear choppy or bold. This is normal all current flat panel technologies when displaying non-native resolutions on a full screen (below than 1280 x 1024 resolution). In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be down. When the interpolated resolution is not an exact multiple of the native resolution, the mathematical interpolation necessary may cause some lines to appear thicker than others.

English

12 13