ADTRAN 2 x E1 user manual Specifications

SECTION 5 SPECIFICATIONS

This section lists the specifications for the TRACER system.

Transmitter

Output Power
100 mW Transmitter	+20 dBm, maximum
1 W Transmitter	+30 dBm, maximum (Factory preset to +27 dBm)
Frequency Range	5725 to 5850 MHz or 2400 to 2483.5 MHz
Channel Bandwidth	62 MHz (5.8 GHz) or 40 MHz (2.4 GHz), (two channels)
IF	140 MHz

Receiver

Receive Level, range	-30 to -89 dBm @ 2.4 GHz, (-30 to -87 dBm @ 5.8 GHz)
Receive Level, maximum	-30 dBm
Receive Level, nominal	-60 dBm
IF	70 MHz

Frequency Plan

Plan A 2.4 GHz	Tx 2.421 GHz, Rx 2.462 GHz
Plan B 2.4 GHz	Tx 2.462 GHz, Rx 2.421 GHz
Plan A 5.7 GHz	Tx 5.747 GHz, Rx 5.827 GHz
Plan B 5.7 GHz	Tx 5.827 GHz, Rx 5.747 GHz

Spread Spectrum Data Pump

Modulation	QPSK
Spreading Method	Direct sequence
Code Length	120 bits
Processing Gain	>12 dB
Number of Codes	10
Chipping Rate	12 times

Interface Specifications

Capacity	2 x E1
Connection	RJ-48C, bantam
Line Code	AMI, HDB3
Framing	CAS, CCS
Alarms	LOS, OOF, CV, CRC, RMT, UA1
Loopbacks	Local and remote, per E1 channel

User Interface

Front Panel	Alarm LEDs, Configuration Switches, Monitor Jacks
Diagnostics	E1 Loopback, Remote Test with built-in BERT

TRACER 2 x E1 User’s Manual 45