Mitel 6510 manual Forwarding a Message without a Comment, To forward the message

Message Menu

Forwarding a Message without a Comment

You can forward a message to another user or a list of users without any comments attached to it.

To forward the message:

1.After listening to a message, press G (number 4 on the keypad) to forward the message. The system prompts you to enter the destination extension number.

2.Enter the destination mailbox number. You can also forward a single message to multiple users, distribution lists, or AMIS/VPIM network sites.

Note: You may also dial-by-name if you do not know the mailbox number (extension) of the person for whom you wish to leave a message.

Depending on the destination, the message is addressed differently:

•User: Enter the destination mailbox when prompted.

•Dial-by-Name: Press *, followed by the digits that correspond to the person’s first or last name.

•Distribution List: Press *, followed immediately by the distribution list number.

•AMIS Network Site: Enter the remote destination mailbox, and then *, followed by the AMIS/VPIM site number.

The system speaks the destination information and prompts you to confirm the information.

Note: To exit message forwarding and return to the message, press the # key.

3.Press 2 to forward the message without a comment. The system confirms that the message has been sent.

4.If you would like to forward the message to another recipient, enter the next recipient mailbox number when prompted and repeat this procedure to forward the message.

5.Once you have forwarded the message to all desired recipients, press # to return to the original message (Message Menu).

6510 UM Telephone User Guide 31