Mitel LG260 manual Dialing From the Contacts List, Speed Dialing, Press the first digit

To place a call using Prefix inAbbreviated Dialing:

1.While in Standby Mode, enter the last four or five digits of the number you wish to call.

2.The five or six digits you set up at a Prefix will be added and the resulting number will appear on the screen. Press to initiate the call.

Dialing From the Contacts List

1.Press > Contacts. -or-

Press CONTACTS (right softkey).

2.Highlight an entry and press to dial the entry’s default phone number.

– or –

To dial anothernumberfrom the entry, highlight the name and press , and then highlight a number and press .

Speed Dialing

You can store up to 98 numbers in your phone’s speed dial memory. Dial speed dial entries using one keypress for locations 2–9 or two keypresses for locations 10–99.

To use One-Touch Dialing forspeed dial locations 2–9:

▶While in Standby Mode, press and hold the appropriate key for approximately two seconds. The display confirms that you have dialed the number when it shows “Calling...”.

To useTwo-Touch Dialing forspeed dial locations 10–99:

1.Press the first digit.

2.Press and hold the second digit for approximately two seconds. The display confirms that you have dialed the number when it shows “Calling...”.

Note	Speed dialing is not available when you are
	roaming; when you are roaming off the Nationwide
	Sprint Network, you must always dial using eleven
	digits (1 + area code + number).

Phone Basics

2A. Phone Basics 25