Appendices | 33 |
Appendix B: Troubleshooting, continued
Sound
| Symptom | Remarks |
1. | There is no sound even when the volume | • Check if the MUTE key is on. |
| is turned up. | • The TV’s analog Listen to setting may be set to SAP (analog |
|
| program from the ANT input) but no SAP is being broadcast. |
|
| • Check that the Sound > Audio > TV Speakers option is set to On to |
|
| hear sound from the TV speakers. Possibly the TV Speakers option |
|
| is Off. |
|
| • If using an A/V receiver, check that the Sound > Audio > TV Speak- |
|
| ers option is set to Off to hear sound from the A/V receiver speak- |
|
| ers. |
|
| • The language selected in the Setup > Antenna Digital Audio |
|
| menu is not being broadcast for the current program. |
|
| • Press and hold the POWER button on the control panel for 10 |
|
| seconds to perform System Reset. |
|
|
|
2. | The sound does not match the screen | The TV’s analog Listen to setting may be set to SAP (analog program |
| picture. | from the ANT input). |
|
|
|
3. | The sound from my A/V receiver does | • Check that DIGITAL AUDIO OUTPUT on the TV’s connection panel |
| not match the screen picture (I should | is connected to the A/V receiver. |
| hear the correct audio from my A/V | Without this connection, devices connected only to the TV (and |
| receiver). | not the A/V receiver) can be heard only from the TV speakers. |
|
| Note that this includes the ANT input, a device (such as a |
|
| camcorder) connected to the TV, and any other device sending |
|
| audio to the TV only. |
|
| • Make sure the A/V receiver is set to the correct input. |
|
|
|
4. | Cannot select an | Plug an unused video plug into the Y/VIDEO jack to activate Auto |
| does not appear in the Input Selection | Input Sensing. Assign the name CD/Audio or MP3 to make the audio |
| menu. | device selectable in the Input Selection menu. |
|
|
|
5. | Sound is coming from the TV speakers | • Connect the TV’s audio output to the A/V receiver. |
| instead of the A/V receiver. | • Change TV Speakers setting to Off. |
|
|
|
For assistance call 1(800)