Mitsubishi Electronics 642 Series Source Off, Format, Automatic, Side-by-Side, Top/bottom, Depth

2. TV Menus 13

Picture, continued

Picture 3D Mode (642 Series only)

Source	Off	• Overrides the 3D processing of any HDMI 1.4a-compliant 3D signal and dis-
Format		plays the signal in 2D instead.
		• Allows access to some of the 2D picture adjustments that are hidden when the
		TV’s 3D mode is set to Automatic.
	Automatic	• When the TV receives a 3D signal from an HDMI 1.4a-compliant device, forces
		the TV automatically into 3D mode and selects the correct 3D format.
		• When the TV receives a normal 2D signal, makes the TV automatically exit 3D
		mode.
		• Not effective with checkerboard 3D signals. Manually select Checkerboard
		when needed.
	Side-by-Side	• 3D format choices for use with 3D signals that are not HDMI 1.4a compliant.
	Top/bottom	• When the TV receives a 3D signal that is not HDMI 1.4a compliant, you
	Checkerboard	must manually select a 3D format here based on the type of 3D signal being
		received.
		• Return the TV to Automatic or Off at the end of the non-compliant 3D
		program.
		• If an HDMI 1.4a compliant signal is received, the TV will automatically override
		any manual 3D selection.
	2D+ Depth	When active, generates a simulated 3D image from an ordinary 2D signal.
Glasses	Standard,	For use with an external emitter connected to the	Use the Standard or
Emitter	Reverse	TV’s 3D GLASSES EMITTER jack.	Reverse setting to synchro-
External			nizes left/right images to
			work with your 3D glasses.
Depth		• Available only when Source Format is set to 2D+ Depth.
		• Highlight the icon and press ENTER to display the adjustment screen.
		• Allows adjustment of the 3D effect from a flatter image to one with more depth.
DLP Link	Standard,	• For use with DLP Link.	Use the Standard or
	Reverse, Off	• Select the Off setting if you are not using DLP	Reverse setting to synchro-
		Link glasses.	nizes left/right images to
			work with your 3D glasses.

Notice Concerning Format Compatibility

The Mitsubishi TVs will support the mandatory HDMI 1.4a 3D signals intended for the United States. Spe- cifically, the TVs will support the 3D signals known as Frame Packing 1080p@24 Hz and 720p@60 Hz (primar- ily from Blu-ray players and gaming consoles), Side- by-Side(Half) 1080p@24/30/60 Hz, 1080i@60 Hz, and 720p@60 Hz, Top-and-Bottom 1080p@24/30/60 Hz

and 720p@60 Hz, and Checkerboard 1080p@60 Hz. However, there may be some 3D sources that are not compatible with the TVs. In all cases: (1) 3D sources must connect to the TVs using the HDMI inputs, and (2) Active Shutter 3D glasses with matching synchroniza- tion emitter or DLP Link Active Shutter 3D glasses are required in order to view 3D content.

For assistance call 1(800) 332-2119