61. Additional TV Features
Inputs and Outputs, continued
Use the HDMI inputs to connect to
The TV’s HDMI inputs are compatible with many
2. ANT (Antenna)
Connect your main antenna or direct cable service (without a cable box) to ANT. The ANT input can receive digital and analog
aVHF/UHF antenna or
3. 3D GLASSES EMITTER (642 Series only)
Use this jack for the special synchronization emitter sup- plied with some 3D glasses. The emitter sends out a signal that synchronizes your 3D glasses with the screen display.
5. Y/VIDEO (Composite Video)
Analog
6. Y/VIDEO Pb Pr (Component Video)
Analog video inputs able to accept
7. L/R (INPUT 1 audio)
Analog stereo inputs for use in conjunction with adja- cent composite or component video jacks.
8. DVI/PC INPUT
Connect a DVI device to one of the TV’s HDMI inputs and use this jack to send analog audio to the TV.
4. DIGITAL AUDIO OUTPUT
This output sends Dolby Digital or PCM digital audio to your digital A/V surround sound receiver. Incoming analog audio is converted by the TV to PCM digital audio. If you have a digital A/V receiver, this is the only audio connection needed between the TV and your A/V receiver.
9. USB
For software updates only. To check for updates, visit
Using the TV with an Audio-Only Device
To use the TV speakers to listen to an audio device such as an MP3 or CD player with analog output, follow these steps.
1.Insert an unused
Y composite video jack. The presence of this con- nector activates the TV’s
2.When the TV detects the video connector, it will display the New Device Found screen. Name the new input CD/Audio or MP3 Player.
3.Connect left (white) and right (red) audio cables from AUDIO OUT on the device to L and R on the TV.
4.Keep the connector in the Y jack while using the
DIGITAL
AUDIO
OUTPUT
L
ANT 3D
GLASSES
EMITTER
R
DIGITAL
AUDIO
OUTPUT
TV jack panel
|
| L | |
|
| R | |
Audio |
| Unused | |
cables | 2. | ||
|
(plug in first)
1.
For assistance call 1(800)