Resolving CEC Conflicts

3 HDMI Control of CEC Devices

Because each manufacturer selects which CEC func- tions to support, some devices may conflict with other devices. If control conflicts arise, you can:

•Turn off TV control of an individual CEC-enabled device (see below).

•Turn off CEC in the device itself. Refer to the device’s Owner’s Guide for instructions.

Turning Off the TV’s HDMI Control of a CEC Device

1.Press MENU on the TV remote control.

2.Highlight Inputs > HDMI Control.

3.Move to the device name and press ENTER to select Off to turn off the TV’s ability to control the device.

4.Press EXIT to clear the menu.

Inputs > HDMI Control menu

Removing an HDMI Device

1.Power off the device.

2.Disconnect the HDMI cable.

3.Press MENU on the TV remote control to enter the TV main menu.

4.Go to Inputs > Name.

5.Highlight the HDMI input name and press ENTER to select Delete.

6.Press EXIT to clear the menus.

Inputs > Name menu with Delete selected for HDMI-3.

Using HDMI Control

As an example of using HDMI Control, press PLAY on the device itself to:

•Power on the TV

•Switch to the device (no need to display the Input Selection menu)

•Begin play of the device

Direct Keys

Test your equipment with the TV’s remote control to find additional supported commands. See the table below for commands that may be available, depending on the individual device.

CEC-enabled VCR, DVD, and DVR functions that may be available:

	Menu	Channel
	Navigation	Tuning
		CH

	ENTER	Digits 0–9,
	ENTER	CANCEL
		CANCEL

	CANCEL	ENTER
	(to cancel)	ENTER
	(to cancel)

If you have a CEC-enabled A/V receiver, CEC-enabled devices connected to the A/V receiver with an HDMI cable may also be controllable. They can be selected from the TV’s Input Selection menu.

CEC-enabled A/V receiver functions. Try the VOL, MUTE, and menu-navigation keys.

For assistance call 1(800) 332-2119

642 Series specifications

Mitsubishi Electronics has long been recognized for its commitment to innovation and technology in various sectors, including industrial automation, consumer electronics, and communications. One of the standout products from this brand is the Mitsubishi 642 Series, known for its impressive performance and versatility across numerous applications.

The 642 Series is primarily geared towards industrial automation, which is a critical area in today’s fast-paced manufacturing environment. This series boasts a range of features that set it apart from competitors. A major highlight of the 642 Series is its robust processing power, enabling it to handle complex tasks seamlessly. The series is equipped with advanced microcontroller technology that ensures high-speed data processing and enhanced operational efficiency.

One of the key characteristics of the Mitsubishi 642 Series is its adaptability to various industrial environments. With varying degrees of ruggedness and temperature resistance, this series can operate effectively in challenging conditions. This is particularly essential for manufacturers who may have equipment exposed to dust, moisture, and extreme temperatures.

Additionally, the 642 Series integrates cutting-edge communication technologies. It supports various industrial communication protocols, including Ethernet/IP, CC-Link, and Profibus, ensuring compatibility with a wide array of devices. This flexibility is pivotal for seamless integration into existing workflows, allowing manufacturers to optimize production lines without overhauling their infrastructure.

Another defining feature of the Mitsubishi 642 Series is its user-friendly interface. The products in this series come with intuitive software that simplifies programming and monitoring, reducing downtime during setup and maintenance. This user-oriented design makes it accessible even for those who may not have extensive technical expertise, thus broadening its market appeal.

Safety is paramount in industrial settings, and the 642 Series emphasizes this through multiple safety features. It includes safety circuits and emergency stop functions that comply with global safety standards, thereby ensuring a secure working environment.

In conclusion, the Mitsubishi 642 Series distinguishes itself through its powerful processing capabilities, adaptability to harsh operating conditions, robust communication options, user-friendly interfaces, and comprehensive safety features. This series embodies Mitsubishi Electronics' dedication to providing solutions that enhance productivity and efficiency in industrial automation. Whether used in assembly lines, robotics, or process control, the 642 Series delivers exceptional performance, making it a reliable choice for manufacturers aiming to stay competitive in an ever-evolving market.

Mitsubishi Electronics 642 Series Resolving CEC Conflicts, Removing an Hdmi Device, Direct Keys

Models: 642 Series