Mitsubishi Electronics CP900DW Installation of INK Sheet, Installing the INK Sheet

INSTALLATION OF INK SHEET

INSTALLING THE INK SHEET	White roller
	Colored roller

1Load the ink sheet roll to the ink cassette before inserting the ink cassette into the printer.

Insert the ink sheet rollers gear into the holes of the ink cassette.

Put the white roller (rolled with ink sheet) to the ink cassette first.

2Then, insert the colored roller (take-up) to the ink cassette.

Put the other sides of rollers. Set IC at this time.

IC chip with the IC holder is attached to the ink sheet.

Set the IC holder to the ink cassette as shown right.

NOTE

•Do not remove the IC chip or IC holder from the ink sheet.

Removal of the IC will stop the printer from functioning correctly.

• Set the projected part of the IC holder to the correct position as shown below.

IC holder

Projected part

1INSTALLING THE INK CASSETTE

Eliminate any slack of the ink sheet.

Hold the colored roller and turn the white roller.

PRECAUTIONS
FEATURES
CONNECTIONS
PREPARATION
SHOOTING	TROUBLE-
OTHERS

13