Dell PP10L owner manual Removing a Battery, Installing a Battery

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Removing a Battery

CAUTION: Before performing these procedures, disconnect the modem from the telephone wall jack.

For information about removing the second battery, see "Using the Module Bay" on page 41.

NOTICE: If you choose to replace the battery with the computer in standby mode, you have up to

30 seconds to complete the battery replacement before the computer shuts down and loses any unsaved data.

1Ensure that the computer is turned off, suspended in a power management mode, or connected to an electrical outlet.

2If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.

3Slide and hold the battery-bay latch release on the bottom of the computer, and then remove the battery from the bay.

Installing a Battery

CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell. The lithium-ion battery is designed to work with your Dell computer. Do not use a battery from other computers with your computer.

Slide the battery into the bay until the latch release clicks.

For information about installing the second battery, see page 41.

36

Using a Battery