Mitsubishi Electronics DD-8040 manual Playing a Disc, Playing a DVD Video Or AN Audio CD, Dvd-V

PLAYING A DISC

PLAYING A DVD VIDEO

OR AN AUDIO CD

DVD-A DVD-V DVD-RW CD VCD

Getting started

Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct.)

1Press the POWER button.

¡The power will turn on.

2Press the OPEN/CLOSE button.

¡The disc loading tray will open.

3Place a disc into the tray.

¡Make sure the disc is sitting properly in the correct recess, with the label side up. Discs that are irregularly shaped, contain a scratch protection film, or have any type of sticker or adhesive label should not be inserted.

¡If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback. Never attempt to play a cracked or broken disc !

¡With DVD Videos that use some titles for playback program signals, playback may start from the second title, or it may skip these titles.

¡During the playback of a common two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction, and is commonly found on pre-recorded discs.

¡During the playback of DVD-RW recorded in VR mode, the sound or picture may freeze momentarily depending on the writing conditions of discs.

¡Operation may vary when you playback DVDs with a disc menu or Video CDs with PBC. Refer to the manual accompanying the disc for details.

¡When you playback Video CDs with PBC, the time counter does not appear on the display.

Cancelling PBC (for playback of a Video CD)

1.Insert a Video CD (Playback will start automatically).

2.Press the STOP button.

3.Enter track number of your choice with the numeric buttons.

4.PBC is now cancelled and the playback of the Video CD will start.

4Press the PLAY button.

¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button.

¡When you playback a DVD Video and DVD Audio or Video CD which a title menu is recorded, it may appear on the screen. In this case, refer to “USING THE TITLE MENU.”

5Press the STOP button to stop play.

Notes

¡A “prohibited icon” may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc.

USING THE DVD MENUS

DVD-V

Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings.

1Press the MENU button.

¡The DVD menu will appear.

2Select the desired title.

¡Press the arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.

3Playback will start from the selected title.

– 14 – EN

1L25