Sprint Nextel M520 manual Contacts Match, Restricting Outgoing Voice Calls, Using Voice Caller ID

Contacts Match

Dial any number saved in your Contacts by entering the last four or five digits of the number.

To access Contacts Match:

1.While in standby mode, select Main Menu > Settings > More... > Call Setup > Contacts Match.

2.Select On or Off.

Note	If there is more than one Contacts entry that
	matches the last four or five digits, a list is displayed
	that allows you to select a number to call.

Restricting Outgoing Voice Calls

Restrict your phone's outgoing calls according to one of the following rules:

Allow all to allow outgoing calls to be made with no restrictions.

Contacts Only to allow outgoing calls to only those numbers saved in the Contacts list.

 Special# Only to allow outgoing calls to only the
numbers set up in the special numbers list. (See
“Creating and Using Special Numbers” on page 58.)		Settings
1.	While in standby mode, select Main Menu and press
	.
2.	Select Settings > More... > Restrict and Lock > Voice.
3.	Enter your lock code.
4.	Select Restrict > Outgoing Call.
5.	Select Allow all, Contacts Only, or Special# Only.

Using Voice Caller ID

Enabling the Bluetooth option (see “Voice Caller ID” on page 122) on your phone allows you to receive a Caller ID announcement when an incoming call is detected by the Bluetooth device.

When an incoming caller has previously been saved to your Contacts list, the caller’s Contacts name will be announced through your headset. If an incoming caller is not currently in your Contacts, only the caller’s phone number will be announced through your headset.

Section 2B. Settings 53