Mitsubishi Electronics DX-ZD6UE Major operations and their functions

ENGLISH

1234

1 POWER indicator

When the EXTERNAL CONTROL switch is set to OFF

or it is set to ON with the connected recorder turned

on, this indicator illuminates while the MAIN switch on

the rear panel is turned on.

2 HDD1, HDD2 indicators (ACCESS indicators)

While HDD 1 or HDD 2 is being accessed, the

corresponding indicator momentarily blinks green.

They keep blinking during recording/copying of data.

In case of an error, they blink or illuminate red. (

See page 18.)

3 TEMP indicator

Illuminates when the internal temperature of this unit

becomes high.

4 FAN indicator

Illuminates when the fan stops.

Major operations and their functions

Contents

Main Caution and care Page Features/Contents Features HDD UNIT ID S Contents How to read this manual Major operations and their functions Front view Major operations and their functions (continued) 4 EXTERNAL CONTROL switch 5 CONT IN terminal 6 CONT OUT terminal 7 SERIAL BUS IN port Page Connections Connectable recorders Digital recorder DX-TL5000E400 (example) This unit 1010010100 Precautions for connection Connections (continued) Startup Setting the ID number of this unit Setting the ID number of this unit 1 Turn OFF the MAIN switch on the rear of this unit. 5 Turn ON the MAIN switch on the rear of this unit. 4 Attach the cover of this unit according to steps 9 to 11 of Attaching the HDD on page 17. Setting the mode of this unit HDD operation mode Mode selection Page Replacing the HDD Precautions for replacing the HDD WARNING Removing the HDD Page Replacing the HDD (continued) Attaching the HDD Page START Troubleshooting Diagnosis by HDD indicators Troubleshooting Maintenance Specications Control input/output terminals and circuits MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.