Specifications
General |
|
Rated Power Supply: | 100 to 240 V AC, 50/60 Hz |
Rated Input: | 0.75 - 0.4 A |
Operating Temperature: | 41 |
Relative Humidity: | Max. 80 (%) |
Altitude: | Max. 2000 (m) |
Dimensions: | 424 (Width) x 361 (Depth) x 49 (Height) (mm) |
Weight: | 6.3 kg (with 2 HDD mounted) |
Control terminals |
|
CONT IN | Input terminal linked with the power supply of the recorder |
CONT OUT | Output terminal linked with the power supply of the recorder |
| (CONT OUT is the through output of CONT IN.) |
GND (Ground) | For grounding |
TEMP ALM | Output terminal for detecting abnormal temperature (open collector output) |
| Active: “Low” level voltage output, Max. current 7 mA DC. |
| Non active: Open, Max. voltage 24 V DC. |
FAN ALM | Output terminal for detecting fan error (open collector output) |
| Active: “Low” level voltage output, Max. current 7 mA DC. |
| Non active: Open, Max. voltage 24 V DC. |
HDD ALM | Output terminal for detecting HDD error (open collector output) |
| Active: “Low” level voltage output, Max. current 7 mA DC. |
| Non active: Open, Max. voltage 24 V DC. |
CONT IN | Reserved. |
CONT OUT | Reserved. |
EXTERNAL CONTROL:
When set to ON: Power is supplied to the HDD when 12V is applied to the input terminal linked with the power supply.
When set to OFF: Power is always supplied to the HDD.
Serial bus terminal |
|
|
Serial bus terminal (2 terminals) | (Only | |
Accessories: | USB2.0 cable | 1 |
| Control cable | 1 |
| Screws | 8 |
| User’s manual (this manual) 1 | |
| Power cord | 3 |
Control input/output terminals and circuits
TEMP ALM terminal
FAN ALM terminal
HDD ALM terminal
• Output Circuit
Output terminal
GND terminal
<Interface circuit inside the unit>
Design and specifications are subject to change without notice.
20
