Mitsubishi Electronics EN-1 instruction

LAN Control Utility

User Manual

Contents
Preparation/SetUp	2
Preparation before using the network function	2
Connection	3
Installation	3
Setting the IP address of the projector	5
When using a DHCP server	6
When not using a DHCP server	7
Telnet setting	8
Setting the password (Password Setup)	9
Setting the display language of ProjectorView (language)	9
Setting the LAN control (LAN-Controlled Mode)	10
Setting the PJLink™ certiﬁcation (PJLink certiﬁcation Mode)	10
Save and exit	11
ProjectorView	12
Using the ProjectorView	12
How to start up	12
VIRTUAL REMOTE controller	14
E-mail notiﬁcation function	14
Initial setting	15
Support for the PJLink™ function	16

EN-1

Image 1

Contents

LAN Control Utility Contents Preparation before using the network function Preparation/SetUpMajor functions System requirements Preparation/SetUp InstallationConnection EN-3 EN-4 How to remove Mitsubishi Projector Control Device Installer EN-5 Setting the IP address of the projector EN-6 When using a Dhcp server EN-7 When not using a Dhcp server EN-8 Telnet setting Setting the display language of ProjectorView language Setting the password Password SetupEN-9 Setting the PJLink certiﬁcation PJLink certiﬁcation Mode Setting the LAN control LAN-Controlled ModeEN-10 EN-11 Save and exit How to start up Using the ProjectorViewProjectorView EN-12 ProjectorView main screen ProjectorViewEN-13 Mail notiﬁcation function ProjectorView Virtual Remote controllerEN-14 EN-15 ProjectorView Initial setting EN-16 Support for the PJLink function Terms and deﬁnitions Support for the PJLink functionEN-17