Mitsubishi Electronics user manual Setting the LAN control LAN-Controlled Mode, EN-10

Preparation/SetUp (continued)

Setting the LAN control (LAN-Controlled Mode)

1

Enter “3” and press the Enter key.

2

To enable the e-mail notification function of Projector- View, enter 1 and press the Enter key. (Default is OFF (0).) (See pages 12 - 15 for ProjectorView function.)

Setting the PJLink™ certification (PJLink certification Mode)

1

Enter “5” and press the Enter key.

•When you don’t use PJLink™ protocol communication, skip this item. (See page 16 for PJLink™.)

2

To enable the PJLink™ certification:

Enter “1” and press the Enter key. (Default is ON (1).)

EN-10