Advanced features (continued)

Supervising and controlling by computer

You can supervise and control the projector’s operation using a personal computer via a LAN network.

To supervise and control the projector, install the software “Projector-Control Device Installer *” contained in the attached CD-ROM. For the installation procedure and usage of the software, see “User Manual for LAN Control Utility” contained in the attached CD-ROM.

*) Functions

Setting of the projector’s IP address

Setting of password, display language, and LAN control

PJLink™ certification setting (telnet function)

Startup of the controlling /supervising tool (ProjectorView) using the Web browser

Major functions

ProjectorView

The controlling /supervising tool using the Web browser

PJLink™

This projector supports standard protocol PJLink™ for projector control and you can control and monitor projector’s operations using the same application among projectors of different models and different manufacturers.

About PJLink™

To use PJLink™ function, the PJLink™ application software is required.

For the specifications of PJLink™, access to the Web site of Japan Business Machine and Information System Industries Association (JBMIA). (http://pjlink.jbmia.or.jp/english)

This projector is fully compliant to the specifications of JBMIA PJLink™ Class 1. It supports all the commands defined by PJLink™ Class 1, and the compliance has been verified with the PJLink™ standard specifications Version 1.0.

Connection

To LAN terminal

Computer

LAN cable (option) (100BASE-TX or 10BASE-T should be supported.)

LAN cable (option) (100BASE-TX or 10BASE-T should be supported.)

External HUB

Use a straight-through category-5 cable for LAN connection.

Don’t touch the metal parts of the LAN connector and LAN cable because static electricity may be discharged from your body, causing damage to the projector.

Using the User Manual

The User Manual for LAN Control Utility is prepared in the Portable Document Format (PDF) in the CD-ROM.

Opening the User Manual:

1.Load the CD-ROM into the CD-ROM drive.

2.Open CD-ROM “FL6900.”

3.Double-click on “MANUAL_LAN.HTML” within the CD-ROM. A language selection list for the User Manual will be displayed.

4.Move the mouse pointer to the desired language and click.

EN-36

Page 36
Image 36
Mitsubishi Electronics FL6900U user manual Supervising and controlling by computer, ProjectorView, About PJLink