Mitsubishi Electronics FL7000U ProjectorView continued, ProjectorView main screen, EN-13

ProjectorView (continued)

5	The password input screen appears. Enter the
	password you set.
	• The default password is admin.
	(Note)
	If you input a wrong password three successive
	times, the Web browser is closed. In this case, repeat
	from step 1.
6	The ProjectorView main screen appears.
	• Some buttons may not be displayed. In this case,
	select [Start] - [Control Panel] - [Java Plug-in] and
	disable the cache.

[ProjectorView main screen]

Press to display the Setup win- dow. (See page 15.)

Press to control the projector. For the functions of these buttons, see the user guide of the projec- tor.

Projector information is dis- played. To display the projector information, set LAN-Controlled Mode to ON (1) (see page 10) and enter necessary information on the Projector Setup screen (see page 15) in advance.

Failures in the projector are indicated with dots. When you place the mouse cursor to a dot, the indicated failure is described in the box at the bottom.

(Note)

When mute is on, you cannot change the lamp mode. If you try to change the lamp mode, a dot appears next to “Command error” of WARNINGS.

EN-13