Connection, Installation, EN-3 | Mitsubishi Electronics FL7000U

Preparation/SetUp (continued)

Connection

Computer

LAN cable (option) (100BASE-TX or 10BASE-T should be supported.)

To LAN terminal

LAN cable (option)

(100BASE-TX or 10BASE-T should be supported.)

External HUB

•Use a straight-through category-5 cable for LAN connection.

•Don’t touch the metal parts of the LAN connector and LAN cable because static electricity may be discharged from your body, causing damage to the projector.

Installation

Before starting installation, be sure to read “ReadMe.txt” contained in the CD-ROM.

	1	Copy three ﬁles (DI_4.1.3.3.msi, Setup.Exe, and Setup.Ini) contained in the Tools folder of CD-ROM to the
	1	hard disk of your personal computer.
		hard disk of your personal computer.

	2	Double-click the ﬁle named Setup.Exe.
	2

	3	When the following window appears, click Next.
	3

EN-3

Page 3

Image 3

Mitsubishi Electronics FL7000U user manual Connection, Installation, Preparation/SetUp, EN-3

Contents

LAN Control Utility Contents System requirements Preparation/SetUpPreparation before using the network function Major functions EN-3 InstallationPreparation/SetUp Connection EN-4 How to remove Projector-Control Device Installer EN-5 Setting the IP address of the projector EN-6 When using a Dhcp server EN-7 When not using a Dhcp server EN-8 Telnet setting EN-9 Setting the password Password Setup Setting the display language of ProjectorView language Setting the LAN control LAN-Controlled ModeEN-10 Setting the PJLink certiﬁcation PJLink certiﬁcation Mode Save and exitEN-11 EN-12 Using the ProjectorViewHow to start up ProjectorView ProjectorView ProjectorView main screenEN-13 ProjectorView Virtual Remote controller Mail notiﬁcation functionEN-14 EN-15 ProjectorView Initial setting EN-16 Support for the PJLink function Support for the PJLink function Terms and deﬁnitionsEN-17