Stovax 1001, 1002, 1000 manual PRE-INSTALLATION Checks, Ventilation

PRE-INSTALLATION CHECKS

1. VENTILATION

Model			RegencySmall	RegencyMedium	RegencyLarge
Small Regency - 1000
Medium Regency - 1001
Large Regency - 1002
	Without liner system	mm	200	200	200
	round (diameter)	inch	8	8	8
Flue/Chimney	Without liner system (square)	mm	180	180	180
Size	minimum dimension	inch	7	7	7
	With liner or factory made	mm	200	200	200
	system (diameter)
			8
	installed in accordance with manufacturers instructions	inch		8	8
Flue/Chimney		m	4.5	4.5	4.5
minimum height*		feet	15	15	15

* When measured from the top of the appliance to the top of the flue, with no horizontal sections

and a maximum of 4 bends with angles of less than 45°

1.1This appliance requires ventilation to supply combustion air. Any room containing the appliance must have a permanent air vent opening with a total free area of at least 50% of the appliance throat area.

1.2Increase air supply provisions where a room contains multiple appliances.

1.3If vents open into adjoining rooms or spaces there must be an air vent of at least the same size direct to the outside.

1.4Permanent air vents should be non-adjustable and positioned where they are unlikely to become blocked.

1.5Site the vents where cold draught is unlikely to cause discomfort. This can be avoided by placing vents near ceilings or close to the appliance, see Diagram opposite.

16