Mitsubishi Electronics HC3000 user manual EN-25, Installation menu, Feature menu

2. INSTALLATION menu
ITEM	SETTING	FUNCTION
SCREEN SIZE	4 options	Select according to the screen size.
VERTICAL LOCATION	±26	Use to adjust the position (height) of the projected image.
LAMP MODE	STANDARD	Select this option when you want to view images in a well-lit room.
	LOW	Select to moderate the intensity of the lamp. The fan operating sound is
		reduced and the lamp lifetime becomes longer.
AUTO POWER ON	ON / OFF	When ON is chosen, the lamp is automatically lit when the power cord is
		plugged in the wall outlet. Choose ON when using the projector mounted on
		the ceiling.
		• The projector is in the stand-by mode when the lamp is off. Use the remote
		control to turn on the lamp.
AUTO POWER OFF	OFF / 5 - 60min	Use to set the time elapsed before the projector enters the stand-by mode
		when there is no signal input from the source.
SPLASH SCREEN	ON / OFF	Choose ON to display the splash screen when the power is turned on.
BACK COLOR	BLUE / BLACK	Use to change the color of the screen that appears when no signal is supplied.
IMAGE REVERSE	OFF	Select when viewing images from the front with the projector installed on the
		floor.
	MIRROR	Select when viewing images projected from the behind of the screen with the
		projector installed on the floor.
	INVERT	Select when viewing images projected from the behind of the screen with the
		projector installed on the ceiling.
MIRROR INVERT		Select when viewing images from the front with the projector installed on the
		ceiling.
TRIGGER OUT	ON /OFF	Choose ON to output the trigger output signal (12 V) from the TRIGGER
TEST PATTERN CROSS HATCH		terminal when the lamp illuminates.
		Select to show the test cross hatch pattern.
	WHITE	Select to show the maximum brightness image.
	BLACK	Select to show the minimum brightness image.

•When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about one minute after turn-on.

•When the lamp mode is switched, the projected image may flicker. This is not a product malfunction.

•Do not change the setting of LAMP MODE frequently.

•To cancel the test pattern, press any button.

3. FEATURE menu
ITEM	SETTING	FUNCTION
ASPECT	AUTO	Select to change the aspect ratio automatically depending on the input signal.
	4:3	Select to project images with an aspect ratio of 4:3.
	16:9	Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
	ZOOM1	Select to enlarge and project images of CinemaScope size.
	ZOOM2	Select to enlarge and project images of Vista size.
	STRETCH	Select to enlarge to 16:9 and project of the images with an aspect ratio of 4:3.
		(Non-linearly stretched.)
	REAL	Select to project images in their original size as input. Not available when the
		keystone adjustment is applied.
PASSWORD FUNCTION		Use to enable or cancel the password lock. See page 30 for details.
MENU POSITION	2 options	Use to change the position of the menu.
CINEMA MODE	AUTO	The film mode will be automatically activated when a film source signal is input.
	OFF	The film mode will not be activated.
VIDEO SIGNAL	8 options	When AUTO is selected, the appropriate video format is automatically selected
		depending on the input signal. If the image isn’t displayed correctly, select the
		desired video format manually.
SET UP	AUTO	Select AUTO for normal use. When LANGUAGE is not set to	and 460i or
		TV60 signal is inputted, the SET UP changes to 7.5% automatically.
	OFF	Select to make black lighter.
	3.75%/7.5%	Select to make black intense.

		• When 7.5% is chosen, the brightness is decreased by set-up cancel func-
		tion for U.S. Choose OFF when the image is dark.
SCART INPUT	ON /OFF	Choose ON when connecting the projector with a device equipped with the
		SCART terminal that can output RGB signal. SCART terminal is used mainly
		in Europe. Choose OFF normally. (Available only for the input signal from the
		COMPUTER IN/COMPONENT VIDEO IN terminal.)
LANGUAGE	10 languages	Use to select the language used in the menus.
RESET ALL	OK	Use to reset the settings of the menu (excluding PASSWORD FUNCTION and
		LANGUAGE) to the factory setting values.

•CINEMA MODE can be adjusted only when a TV60,480i signal is being displayed.

•When SCART INPUT is set to ON, normal computer signals aren't projected.

•Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device equipped with the SCART terminal.

•Some AV devices equipped with the SCART terminal aren't compatible with this projector.

ENGLISH

EN-25