Troubleshooting

Before asking for repair of the projector, check the following. If the symptom persists, stop using the projector, be sure to unplug the power plug, and then contact your dealer.

No image appears on the screen.

Problem

Power can not be turned on.

Solution

• Check whether the indicators are on or off and how they are lightning.

POWER

STATUS

 

Solution

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connect the power cord to the projector.

 

 

Off

Off

Plug the power cord into a wall outlet.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If any objects are blocking the air inlet or outlet grill, remove them and carry

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

out the following.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Unplug the power cord from the wall outlet.

 

 

 

 

 

 

 

 

 

Off

 

2. Make sure that the projector has cooled off.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Plug the power cord into the wall outlet.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Press the POWER button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If any objects are blocking the air inlet or outlet grille, remove them.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Don't expose the air outlet grilles to hot air emitted from a heating appliance.

Steady red

Blinking

Check whether the filter is clogged with dirt or dust.

 

 

 

 

 

 

 

 

 

orange

 

Clean the filter, if crogged.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

After the STATUS indicator stops blinking, press the POWER button.

 

 

 

 

 

 

 

 

 

Blinking

 

• If you unplug the power cord while the fan is rotating, the lamp may not turn on about one minute when

 

 

 

 

 

 

 

 

 

 

you plug the power cord next time.

 

 

 

 

 

 

 

 

 

green

 

• The lamp can't turn on again for one minute after it goes out.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the POWER button several times.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Replace the lamp. (The lamp is at the end of its life.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Steady red

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Off

Attach the lamp cover on the bottom.

 

 

 

 

 

 

 

 

 

 

 

Blinking

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Unplug the power cord from the wall outlet and contact your dealer.

 

 

 

 

 

 

red / green

Steady

 

 

 

 

 

 

 

 

 

 

 

or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blinking

 

 

No image appears on the screen.

Check that the lens cap is removed.

It may take about one minute for the lamp to light up.

The lamp fails to light up on rare occasions. In such a case, wait for a few minutes and then try again.

If the projector was turned off before the lamp was cooled down sufficiently last time, the fan may start rotating and the POWER button may not work after the power cord is plugged. After the fan stops rotating, press the POWER button to turn back on the POWER indicator.

Check that the intake vent is clean.

Set SCART INPUT in the FEATURE menu to OFF. (See page 25.)

Check that the lamp cover is closed. (See page 33.)

Check that the cables connected to the external devices are not broken.

When an extension cable is being used, replace it with the supplied cable for check. When images are displayed correctly, add an RGB signal amplifier to the extension cable.

Projected images

• This problem may occur when the intake vent and/or exhaust vents are blocked. (In

suddenly disappear.

such a case, the STATUS indicator brinks orange.)

 

 

Remove the objects blocking the intake vent and/or exhaust vents and then carry

 

 

out the following procedure.

 

1.

Wait for the intake fan and/or exhaust fan to stop. (Wait until the STATUS

 

 

indicator goes out.)

 

2.

Unplug the power cord from the wall outlet.

 

3.

Wait about 10 minutes.

 

4.

Plug the power cord into the wall outlet.

 

5.

Press the POWER button.

 

• When the STATUS indicator is steady red, it is indicating that the lamp should be

 

replaced. Replace the lamp in this case.

The screen for entering the password appears.

PASSWORD FUNCTION in the FEATURE menu has been set to DISPLAY INPUT to enable the password lock.

Enter the password or contact the person in charge of management of the projector. (See page 30.)

EN-34

Page 34
Image 34
Mitsubishi Electronics HC3000 user manual Troubleshooting, EN-34, No image appears on the screen Problem, Solution

HC3000 specifications

The Mitsubishi Electronics HC3000 is a cutting-edge projector designed to deliver high-quality visuals for both home theater enthusiasts and professional presentations. Known for its exceptional image clarity and versatility, the HC3000 stands out in the crowded market of digital projection.

One of the key features of the HC3000 is its superior resolution capability. With support for Full HD (1920 x 1080), it ensures that images are sharp and vibrant, making it ideal for cinematic experiences and detailed presentations. The high brightness level, which reaches up to 3000 ANSI lumens, allows for clear visibility in various lighting conditions, whether in a dimly lit home theater or a well-lit conference room.

The HC3000 employs advanced DLP (Digital Light Processing) technology, which enhances color accuracy and reduces the possibilities of rainbow effects that can occur in some projection technologies. This DLP technology is complemented by Mitsubishi's proprietary color wheel, which enhances color reproduction, providing deep blacks and rich colors that make images pop.

Another standout characteristic is its flexible connectivity options. The HC3000 includes multiple input terminals, including HDMI, VGA, and composite inputs, making it compatible with a range of devices such as Blu-ray players, gaming consoles, and laptops. This multitude of options ensures that users can easily integrate the projector into their existing systems and switch between different sources without hassle.

Portability is another strength of the HC3000. Weighing in at a manageable size, it can be transported easily, making it a great option for business professionals who need to present on the go. Its compact design does not sacrifice performance for size, maintaining high-quality output even in a portable format.

Additionally, the HC3000 incorporates a robust cooling system designed to extend the life of the projector's lamp. This feature not only enhances durability but also minimizes operational noise, allowing for an immersive viewing experience without distracting sounds.

In summary, the Mitsubishi Electronics HC3000 is a versatile and high-performing projector, offering Full HD resolution, advanced DLP technology, excellent connectivity options, and portability. Whether for home entertainment or professional use, it delivers outstanding image quality, making it a popular choice among consumers seeking reliability and performance.