Mitsubishi Electronics HC4000 user manual Feature menu

Menu operation (continued)

3. FEATURE menu

opt.

FEATURE		AV MEMORY 1
	ASPECT	AUTO
	PASSWORD	DISPLAY
	FUNCTION	INPUT
	MENU POSITION	1.
	MENU DIMMER	OFF

	CINEMA MODE	AUTO
?	VIDEO SIGNAL	AUTO

		SETUP	AUTO
		SCART INPUT	OFF
	A Ë	LANGUAGE	English
		RESET ALL	OK
3. FEATURE menu
ITEM				SETTING		FUNCTION
ASPECT					AUTO	Select to change the aspect ratio automatically depending on the input signal.
			4:3			Select to project images with an aspect ratio of 4:3.
			16:9			Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
				ZOOM1		Select to enlarge and project images of CinemaScope size.
				ZOOM2		Select to enlarge and project images of Vista size.
			STRETCH			Select to enlarge to 16:9 and project of the images with an aspect ratio of 4:3. (Non-
						linearly stretched.)
			ANAMORPHIC1			This mode is suitable for viewing 2.35:1-size images using the anamorphic lens.
						Use the p or q key to adjust the vertical display position.
						This mode doesn’t support input signals from personal computers.
			ANAMORPHIC2			This mode is suitable for viewing 16:9- or 4:3-size images or images input from personal
						computers using the anamorphic lens.
PASSWORD FUNCTION						Use to enable or cancel the password lock. See page 35 for details.
MENU POSITION				2 options		Use to change the position of the menu.
MENU DIMMER				ON / OFF		Use to reduce the brightness of the menu.
CINEMA MODE					AUTO	The film mode will be automatically activated when a film source signal is input.
						Select AUTO for normal use.
						When flicker occurs on the screen or jaggies on slanting lines are remarkable, select
						FILM when a film source signal is input or select VIDEO for other signals.
					VIDEO	The film mode will not be activated.
					FILM	Fixed to the film mode.
VIDEO SIGNAL				8 options		When AUTO is selected, the appropriate video format is automatically selected
						depending on the input signal. If the image isn’t displayed correctly, select the desired
						video format manually.
SETUP					AUTO	Select AUTO for normal use. When LANGUAGE is not set to	and 480i, 480p or
						TV60 signal is input, the SETUP changes to 7.5% automatically.
					OFF	Select to make black lighter.

3.75% / 7.5% Select to make black intense.

•When 7.5% is chosen, the brightness is decreased by the set-up cancel function for the U.S. Choose OFF when the image is dark.

SCART INPUT	ON / OFF	Choose ON when connecting the projector with a device equipped with the SCART
		terminal that can output RGB signal. SCART terminal is used mainly in Europe.
		Choose OFF normally. (Available only for the input signal from the COMPUTER IN/
		COMPONENT VIDEO IN terminal.)
LANGUAGE	10 languages	Use to select the language used in the menus.
RESET ALL	OK	Use to reset the settings of the menu (excluding PASSWORD FUNCTION and
		LANGUAGE) to the factory setting values.

•When SCREEN SIZE of ADVANCED MENU is set to CINEMA SCOPE(2.35:1) in the IMAGE menu, STRETCH, ANAMORPHIC1 and ANAMORPHIC2 cannot be selected for ASPECT.

•When SCART INPUT is set to ON, normal computer signals aren’t projected.

•Use a SCART-BNC (or SCART-Mini D-SUB 15-pin) cable (option) when connecting this projector with an AV device equipped with the SCART terminal.

•Some AV devices equipped with the SCART terminal aren’t compatible with this projector.

•It may take a little while to carry out RESET ALL in the FEATURE menu.

EN-28