Troubleshooting (continued)
Images are not displayed correctly. (continued)
Problem | Solution |
|
|
Projected images | • Connect the plugs of the cables to external devices securely. |
become wavy. | • Keep the projector away from devices that emit interfering radio waves. |
| • When the keystone adjustment is carried out, the image may not be displayed correctly |
| because of the type of input signal. This isn’t a product malfunction. In this case, |
| readjust the keystone so that the amount of keystone correction is as small as possible. |
|
|
Hue is not appropriate. | • Check that the cables connected to the external devices are not broken. |
|
|
Tint in projected | • Check that COMPUTER INPUT in the SIGNAL menu is correctly set. (See page 29.) |
images is incorrect. | • Check that the cable connected to the external device isn’t broken. |
|
|
Different color tint. | • When comparing images projected by two projectors, tints in the displayed images |
| may be different because of variation between their optical components. This is not a |
| malfunction. |
| • When comparing the image projected by this projector with those displayed on the |
| television or PC monitor, tints in the displayed images may be different because of |
| difference in the range of color reproducibility. This is not a malfunction. |
Color unevenness | • Since the projector utilizes a |
appears in images. | the screen and along the rims of the active area) that are caused by diffraction of light |
| may occur. This is not a malfunction. |
Only the motion areas | • This is caused by the computer being used. Contact the manufacturer of your |
in the images supplied | computer. |
from the computer |
|
aren’t displayed. |
|
|
|
Projected images are | • Match the output resolution of your computer with the resolution of the projector. For |
obscured. | the method to change the output resolution of the computer, contact the manufacturer |
| of your computer. (See page 46.) |
| • Some images and texts appear obscured during the keystone adjustment. In such |
| cases, use the projector without applying the keystone adjustment. (See page 12.) |
|
|
Image remains | • When image from VCR is projected, it may remain freezing during speed search. This |
freezing. | is not a malfunction. |
Noise appears around | • In some images such as DVD, noise may appear around the recorded image. In this |
the image. | case, decrease the setting value of OVER SCAN of the SIGNAL menu. (See page 29.) |
Projected images are | • After the Power button or On button on the remote has been pressed, or the Lamp |
flickering. | mode setting has changed, images may be flickering until the lamp lights stably. This is |
| an expected behavior. |
| • When selecting the input signal, Auto Position, and Color Enhancer, the projected |
| image may be flickering temporarily. This is not a product malfunction. |
