16
Connecting an Antenna to a Cable Box and VCR, Connecting Audio/Video to the Cable Box or VCR
Figure 6. Connecting the VCR Audio/V ideo.
Note: The TV side panel and connections shown here are for reference only and may vary by model.
You may connect to the S-VIDEO or VIDEO
terminal but not to both.

Cable Box

(Figure 5)
1. Connect the incoming cable to ANT on the TV
side panel.
NOTE: For best performance, please see Composite
Video with Audio or S-Video with Audio,
below.
Figure 5. Connecting the VCR with cable box.

Composite Video with Audio or S-

Video with Audio (Recommended)

(Figure 6)
1. Connect a video or a S-Video cable from VIDEO
OUT on the VCR back panel to VIDEO or
S-VIDEO, INPUT-1 or INPUT-2 on the TV side
panel.
2. Connect a set of audio cables from AUDIO OUT
on the VCR back panel to AUDIO INPUT-1 or
INPUT-2 on the TV side panel.
• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel
If your VCR is mono (non-stereo), connect only the
white (left) cable.
��
���
�������
�������� ����� �� ����� ���
�����
�������
������� �����
������ ��� ��� � �����
��������� �� ������
���������� �� ����
������
����
���
�����
����
����������
�������� ����
�����
���
�����
���
�� ���� ����� � ����
�������������� ����������
�������� ������� ��������
�����
��
���
�������
������� �����
�������������
�������� ���� ���������
��
���
������ ����� �������� �������