1. Television Overview 11
Stand Removal
Stand-Removal Procedure:
Disconnect the TV’s AC power cord from the AC
1.
power outlet.
Spread the protective sheet that was wrapped
2.
around the TV on a flat, even surface, such as a
sturdy table. The protective sheet will help prevent
damage to the display.
IMPORTANT: To avoid damaging the screen,
make sure there are no for eign objects under or
on top of the protecti ve sheet.
Position one person on each side of the TV (lef t and
3.
right sides). Have each person firmly grasp their
side of the TV and gently place it face down on the
protective sheet with the display stand hanging over
the edge of the table. See the illustration to the
right.
Use a magnetic philips screwdriver to remove the
4.
four stand screws from the recessed holes (see
illustration to right). Note: A regular screwdriver
can be used with a separate magnetic pick-up tool.
While one person holds the TV with both hands,
5.
have the other person grasp the plastic portion of
the stand (see illustration to the right) and remove
the stand by pulling it away from the TV in the direc-
tion of the large arrow shown in both illustrations.
The TV is now ready for wall mounting. See “Wall
6.
Mount Kit” below.
5BCMF
1SPUFDUJWF
TIFFU
57 4UBOE
Wall Mounting Kit (purchased separate ly)
To order a Wall Mounting Kit, please contact Peerless
Industries, Inc. at (800) 473-3753 or visit www.peerless-
mounts.com. Use wall mounting kit Model ST650.
Note: Complete instructions are included with the kit.
To order a Wall Mounting Kit from Mitsubishi Digital
Electronics America, Inc., please visit
www.mitsuparts.com or call (800) 553-7278.
CAUTION: Using this TV wit h other than the autho-
rized accessories may c ause the TV to become
unstable, which ca n cause damage to the produc t
or possible injur y.
CAUTION
At least TWO PEOPLE are neede d to safely remove the stand. Have on e person hold the TV while t he other
person removes the st and. Failure to follow these recom mendations may result in pe rsonal injury and
damage to the produc t.
TV Back
Cover
Protective Sheet