IR Emitter Placement

The remote control sensor is somewhere between these two positions. This is usually enough accuracy for placement of the IR emit- ters.

In some cases, the emitter works better facing downward from the top of the device. Experi- ment to find what works best.

5. Secure the emitter ends in place using double- sided tape.

6. Place any unused ends behind the devices to prevent stray signals from reaching the IR sensors.

6. NetCommand IR Control

An IR emitter cable is included with the TV.

The NetCommand system uses emitters connected to the IR—NetCommand Output jack to control other devices such as DVD players, cable boxes, satellite receivers, and VCRs.

1.Connect the plug end of the supplied IR emitter cable to the IR—NetCommand Output jack on the TV main panel.

2.Run the cable for each of the emitter ends under, alongside, or over each device to be controlled so that the emitter end is in front of the area where the remote control sensor is located.

3.Position the emitter end with the emitter bulb facing the remote control sensor. The bulb emits infrared light in a cone-shaped pattern. Place the bulb far enough from the sensor to allow the cone pattern to reach the sensor.

The IR sensor is usually behind the plastic window of the front display panel. It is sometimes visible with the aid of a flashlight and is normally a round or square cutout behind the plastic.

If you cannot see the sensor and the device’s Owner’s Guide does not specify the location, you can find it by following these steps using the device’s remote control:

a.Hold the device’s remote about one-half inch from the front of the device. Starting from one end of the display window plastic, press the POWER button.

b.If the device does not respond, move the remote control one inch toward the center and try again.

c.Repeat this until the device responds.

d.Note this location and then start over from the other end of the display window plastic, repeat- ing until the device responds again.

		0UIFS"7%FWJDF
HDMI
HDMI
4
4
3
2

		"73FDFJWFS
1

IR- NetCommand		S-VIDEO
Output / External		S-VIDEO
Controller Input
INPUT3		1080i)/
		1080i)/
		Pr
VIDEO		/720p
		/720p
L		Pb
AUDIO		/480p
AUDIO		(480i
R		(480i
R		Y / VIDEIR- NetCommand
DVI/PC	Y	Y / VIDEIR- NetCommand
L		Output / External
L		L
		Controller Input
AUDIO		AUDIO
R		R
	INPUT2	INPUT1
		$)')4!,
		!5$)/
		/54054
,	2
!62 !5$)/		57#BDL1BOFM
/54054		57#BDL1BOFM
ANT2/AUX	ANT1/MAIN

Connecting IR—NetCommand Output

	*OGSPOUPGBTJOHMF	*3TFOTPS
	BWFSBHFTJ[FEEFWJDF	*3TFOTPS
	BWFSBHFTJ[FEEFWJDF
	0OUPQPGBTJOHMF

*3TFOTPS
*3TFOTPS	UBMMEFWJDF	*3TFOTPS
		*3TFOTPS
	*OGSPOUTIBSFECZ	*3TFOTPS
	UXPBWFSBHFTJ[FE	*3TFOTPS
	UXPBWFSBHFTJ[FE
	EFWJDFT
	EFWJDFT

Place IR emitters so the signal can be “seen” by the IR sensor on each device.

IMPORTANT

Position IR emitters so that each device’s sensor “sees” the signal from only one emitter. Otherwise, a device receiving signals from multiple sources (remote controls, IR emitters) may not respond at all.

LT-52246, LT-46246, LT-52148, LT-46148, LT-40148 specifications

Mitsubishi Electronics has consistently been at the forefront of innovation in the electronics sector, and their line of large-screen televisions is no exception. The models LT-40148, LT-46148, LT-52148, LT-46246, and LT-52246 exemplify the blend of advanced technology, impressive performance, and user-friendly features that consumers have come to expect from the brand.

The LT-40148 is a 40-inch television that serves as an excellent choice for smaller living spaces. With a Full HD resolution, this model delivers crisp and vibrant imagery, making every movie night or gaming session an immersive experience. The LT-46148 steps up to a 46-inch screen, offering enhanced viewing for larger rooms. Both models boast Mitsubishi's proprietary color processing technology, which ensures accurate color reproduction for a lifelike viewing experience.

Moving up in size and specifications, the LT-52148 offers a generous 52 inches of display, making it perfect for avid sports fans and movie buffs who crave a cinematic experience at home. This model incorporates Mitsubishi’s unique LED backlighting, which provides enhanced brightness and contrast, illuminating every detail of the picture. The LT-46246 and LT-52246 offer even larger displays at 46 inches and 52 inches, respectively, catering to those who desire both size and exceptional quality.

All five models feature Mitsubishi’s advanced image processing technology, which enhances video smoothness and reduces motion blur during fast-paced scenes. Additionally, these units are equipped with multiple HDMI inputs, making it easier than ever to connect various devices such as gaming consoles and Blu-ray players. The incorporation of built-in speakers and advanced audio technologies ensures that the audio output is just as striking as the visuals.

Moreover, these models also include energy-efficient features that align with modern sustainability efforts, making them a responsible choice for environmentally conscious consumers. In terms of design, Mitsubishi TVs exhibit sleek and stylish aesthetics, able to harmonize with any living space decor.

In summary, Mitsubishi Electronics’ LT-40148, LT-46148, LT-52148, LT-46246, and LT-52246 televisions merge cutting-edge technology with user-friendly features, delivering unparalleled viewing experiences. Whether it's for gaming, movies, or sports, these models surpass expectations, ensuring quality entertainment for any household.

Mitsubishi Electronics LT-46148 IR Emitter Placement, An IR emitter cable is included with the TV

Models: LT-52246 LT-46246 LT-52148 LT-46148 LT-40148