14 2. TV Setup

Initial TV Setup

Use the Setup menu for basic TV setup options.
Press
1.
MENU
to open the Main menu.
Press
2.
to highlight the Setup icon and display the
Setup menu.
Memorizing Channels
For ANT 1 and ANT 2
Note: 246 Series TV. I
f using a CableCARD, the
TV will automatically acquire the complete list
of available channels from the service pro-
vider. Perform channel memorization for
ANT 1
CableCARD service only if you need to reacquire
the channel list.
To start channel memoriz ation
Connect the incoming cable to
1. ANT 1
or
ANT 2
.
This is the cable from an antenna or a cable service
without a cable box.
With the
2.
Setup menu displayed, press to high-
light the Scan icon.
Start channel memoriz ation from the Setup menu.
Press
3.
to highlight an input selection based on
your connections:
Input Condition
Ant 1 Air
Ant 2 Air
When connected to an indoor or
outdoor antenna
Ant 1 Cable
Ant 2 Cable
When connected to direct cable (no
cable box)
Press
4.
to highlight the on-screen S TART button.
Press
5.
ENTER
to start automatic channel memoriza-
tion.
To stop channel memorizati on before
completion, pres s
CANCEL
.
When memorization is complete you can:
6.
• Press
MENU
once to return to the top row of icons.
• Press
MENU
again to return to the Main menu.
• Press
EXIT
to watch TV.
After channels have been memorized:
• To tune to memorized channels, press
CH
/
while watching TV on the
ANT 1
or
ANT 2
input.

Setting Up TV Inputs

When You First Connect a Device
The TV’s Easy Connect™ Auto Input Sensing feature
detects most connections automatically.
Note: For connection and setup of a personal com-
puter, see the information on page 18.
Auto Input Sensing for Most Devices
When you first connect a device, the TV will:
a. Detect the connection an d automatically switch
to the input
b. Prompt you to identify the device type (if not
recognized automatically)
c. Prompt you to perform NetComm and set-up for
the device, if available
d. Repeat these steps for any additional newly
detected devices
See below for connections which trigger Auto Input Sensing.
Auto Input Sensing Available
Y/VI DEO
(detected as
composite video)
Y/VI DEO
plus
Pb
(detected as component video)
S-VIDEO
HDMI
*
USB
(USB photo port)
INPUT 4 AUDIO
(
with video plug, see page 28.
Auto Output Sensing
Available
DIGITAL AUDIO OUTPUT
(orange jack)
AVR AUDIO OUTPUT
(
red jack)
AVR AUDIO OUTPUT/
SUBWOOFER OUTPUT
(
red jack, 246 Series TVs)
No Auto Sensing
ANT 1
and
ANT 2
*
If the device is powered off when connected, detec-
tion occurs when the device is next powered on.
• UsetheSetup > Edit menu (page 45) for additional
channel options, such as adding or deleting chan-
nels from memory, naming channels, and saving
favorite channels in custom memory banks.
See chapter 5, “TV Menu Settings,” to:
• SettheTVclock(page46)
• SettheTVTimer(page47)tohavetheTVpoweron
at a preset time.
• SelectanEnergyModetomanagepowerusewhile
the TV is off (page 48).