8 1. Television OverviewFront-Panel IndicatorsSTATU S•
indicator. Off during normal TV
operation.
POWER/TIMER• indicator. Lit when TV is
powered on; flashes when TV is powered
off and the auto-on TV Timer is set
.
IR Sensor• (Infrared Sensor). Detects infra-
red signals emitted by the remote control.
STATUS Indicator
LED Color TV Condition Additional Information
None Normal TV on or standby condition. Normal operation.
Red
TV may require service.
Turn off the TV and unplug the set from the AC power source.
Wait one minute and then plug the set back in. See Appendix F.
If the LED is still on, contact your dealer or a Mitsubishi
Authorized Service Center. Go to www.mitsubishi-tv.com or call
1-800-332-2119 to receive Authorized Service Center information.
POWER Indicator
LED Color TV Condition Additional Information
None Standby condition. Normal operation.
Green TV is powered on. Normal operation.
Green TV powered off, auto-on timer is set. Normal operation. TV can be turned on at any time.
Green 1. TV just plugged into AC outlet. Wait approximately one minute for blinking to stop before turning
on. Normal operation.
2.
AC just restored after power failure.
3. TV rebooting after Sy stem Reset
used.
4. TV rebooting after power flu c-
tuation or receiving abnormal
digital signals from a digital
channel or digital device.
5. You have begun the procedure
to update software from an
authorized flash memory device.
Off Steady On Slow Blinking Fast Blinking
STATUSPOWER
148 Series TVs
STATUS POWER
IR Sensor
IR Sensor
246 Series TVs