Mitsubishi Electronics LVP-X30U Setting the RGB/YCbCr connector, Setting the Display Frame

Setting the RGB/YCbCr connector

The RGB/YCbCr connector can be switched and used as the component video signal (YCbCr) input connector.

1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor $ / % keys to select “COLOR”.

2 Use the cursor { / } keys to select “SOURCE CHANGE”.

3 Use the cursor $ / % keys to set the “SOURCE CHANGE”.

The following can be selected.

●RGB ● YCbCr

When component video (YCbCr) input is used, use the optional component video cable.

S e t t i n g i n A c c o r d a n c e W i t h I m a g e C o n t e n t s

Setting the Display Frame		ENGLISH
The display frame can be set individually for each input.
1	Select the input for image selection (page
	16).
2	With the FLIP COVER of the remote con-
	trol open, press the MENU button to dis-
	play the Advanced menu, then use the
	cursor $ / % keys to select “VIEW”.
3	Display the frame, then use the cursor {
	/ } keys to select “ASPECT”.
4	Use the cursor $ / % keys to set the
	“ASPECT” ratio.
	Any of the following four different settings can be
	selected for images.
	● REAL (input signal projection without pixel
	replacement)
	● AUTO (projection after automatic input signal
	zoom in/zoom out)
	● DIRECT (the original aspect ratio of the im-
	age is maintained at all times)
	● 4:3 → 16:9 (4:3 aspect ratio images are pro-
	jected after conversion to 16:9 aspect ratio)

Setting Filter

This is used to set the sharpness during pixel conversion (image compression/enlargement).

1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor $ / % keys to select “VIEW”.

2 Display the frame, then use the cursor { / } keys to select “FILTER”.

3 Use the cursor $ / % keys to set the sharpness.

To close the menu

Press the CANCEL button.

E – 27